I know this is a repost, but I looked all over and I can't find the thread.

I am looking to do a rice pipe intake, but as always, I am looking for the easy way out.

From what I can tell, this guy is doing things right...do you see anything wrong with this kit?

http://cgi.ebay.com/ebaymotors/ws/eB...966379599&rd=1

Only problem I see, is that the K&N filter may not have an IAT sensor hole, but I think I can take care of that problem.

Thanks.

BTW, I do know that I will need to make a heatshield eventually to take full advantage.

dont do that one, the bend is too much and the pipe is too short

Ok, so just buy the parts separately, then customize as needed?

or you can try PMing Salmanman, I havent seen him around much, but a while back he had some good intake on Ebay for about 150 shipped with a K&N filter.....or go to www.seriesoneperformance.com and DrJay has some stuff there, you can PM him too.....this is only if you dont want to build it yerself.

I think I'll get the parts my self before I drop an extra $50 or more :? Thanks for the link though, good stuff on that site.

autozone intake $30
k&N filter $$$ depends on filter
coupler $5

the whole setup cna be had for under 100

Autozone pipes have gone up.
I think I paid 35 or 40 for mine and the RX-4750 is 60.00 from www.ajusa.com .

extending the IAT harness is fairly simple too. Reflectex makes a good heart shield.

here'* the one I did:
http://www.bonnevilleclub.com/forum/...ic.php?t=32022

seems like everything has gone up lately

Especially gas.......

IM kinda dissapointed because I went to 2 Autozones to look for that intake pipe, and from what I gather they have discontinued it because they stopped carrying it. If anyone can help me find this part I would be greatly appreciated and pay *&H.

Else I may go for the $150 setup, but its pricey. :(