HOW DO YOU REMOVE EXT DOOR MOLDINGS OR TRIM FROM A SSE? I CAN SEE SCREWS ON THE BOTTOM OF THEM

edit

Hans, he'* asking about the EXTERIOR door cladding.


94BONNE:

It is VERY simple.

1. Remove the two screws on the inside of the door that are holding the cladding on.

2. CAREFULLY pry out the bottom edge of the cladding working your way across.

3. CAREFULLY pry out the black strip that goes across the top edge of the cladding, working your way across. I used a flat screwdriver to help pry it out.

4. Slide the cladding up and pull out.

Reinstall in the opposite direction.

Also, please put your car(*) in your signature area so we can help you better. And please take CAPS lock off.

92 SSE OUTSIDE DOOR PANEL

Please put that in your signature area.

This thread of mine may help.

http://www.bonnevilleclub.com/forum/...ic.php?t=78949

The two screws you remove are pictured on the first and second page, on the inner lip of the door.

THANKS FOR THE INFO

Thanks for bringing this up, I need it too.

And 94BONNE, turn the caps off, it'* considered yelling and is frowned upon.