To do list: (what's your's)
Senior Member
Posts like a Camaro
Joined: Jan 2004
Posts: 922
Likes: 0
From: Aurora, Illinois
Need to Install:
Hulkspeed PEM'*
New O2 Sensor
Intense 3.4" MPS
Oversized Tensioner
Under seat cold cathode setup (white)
Other:
fuel filter
Autolite 104'* (grrr my 605'* have about 1000 miles on them, swapped them after my LIM gasket replacement)
rear driver side door has some sort of annoying rattle that needs addressing
Due for oil change in ~800 miles
Needs a wash and wax
Check wheel speed sensors
clear tails
Get a 3" downpipe with high flow cat
Hulkspeed PEM'*
New O2 Sensor
Intense 3.4" MPS
Oversized Tensioner
Under seat cold cathode setup (white)
Other:
fuel filter
Autolite 104'* (grrr my 605'* have about 1000 miles on them, swapped them after my LIM gasket replacement)
rear driver side door has some sort of annoying rattle that needs addressing
Due for oil change in ~800 miles
Needs a wash and wax
Check wheel speed sensors
clear tails
Get a 3" downpipe with high flow cat
Senior Member
Posts like a Corvette
Joined: Jul 2006
Posts: 1,251
Likes: 0
From: Cheyenne, Wy.
bonneville
new fuel pump and sending unit
pems
DP
new exhaust
lim gaskets new uim
oil change
wiper blades
new front components
new strus and maybe shocks
new tires
wire in the sub
clear the corners
either hptuners setup or intense pcm
rework my cai
interior camera mount setup
Trans am
well the big things will be
new floor board
subframe connectors
complete engine rebuild with bored over 10
block and heads decked
new cam set up for boost
new throttle body adapter EFI
nitrous plate
that is if money allows
new fuel pump and sending unit
pems
DP
new exhaust
lim gaskets new uim
oil change
wiper blades
new front components
new strus and maybe shocks
new tires
wire in the sub
clear the corners
either hptuners setup or intense pcm
rework my cai
interior camera mount setup
Trans am
well the big things will be
new floor board
subframe connectors
complete engine rebuild with bored over 10
block and heads decked
new cam set up for boost
new throttle body adapter EFI
nitrous plate
that is if money allows
Senior Member
Posts like a Northstar
Joined: Dec 2006
Posts: 635
Likes: 0
From: Niagara Region, ON, Canada
Here'* my list:
Finish restoration of new (to me) gold cross lace rims.
(Pics and step by step for the restoration to come, they're coming up nicely!!)
Just ordered parts for K&N intake.
New front rotors and brake pads.
Remove Aerolite rims, and install gold cross lace mounted with new tires.
While I'm in there, see what'* happening with the Traction Control.
Steam clean carpets.
Wipe down leather seats.
De-Grease engine.
Search for grey SSEi floor mats.
Search for passenger side SIR air bag cover, grey.
Search for passenger side marker light.
That should do it, and annoy my wife during the process.
Adam
Finish restoration of new (to me) gold cross lace rims.
(Pics and step by step for the restoration to come, they're coming up nicely!!)
Just ordered parts for K&N intake.
New front rotors and brake pads.
Remove Aerolite rims, and install gold cross lace mounted with new tires.
While I'm in there, see what'* happening with the Traction Control.
Steam clean carpets.
Wipe down leather seats.
De-Grease engine.
Search for grey SSEi floor mats.
Search for passenger side SIR air bag cover, grey.
Search for passenger side marker light.
That should do it, and annoy my wife during the process.
Adam
Yeah I have a whole bunch to do too. The list is in my treo though.
Senior Member
True Car Nut
Joined: Aug 2003
Posts: 5,246
Likes: 3
From: Salina, KS
Originally Posted by willwren
You don't want to see my list. Grown men would burst into tears.
Alignment
Tires (hopefully I can wait to get them in Oregon)
New rims (wanting the "cragar" looking ones that'* for sale in the For Sale section right now...wish I can afford them)
INTENSE package (hopefully get it in time for install at WCBF '07)
All of this is if I can actually get some decent income going. Otherwise it will be just trying to keep my car up to maintenance.
