Bonnevilles and tools
Senior Member
Posts like a Corvette
Joined: Nov 2002
Posts: 1,296
Likes: 0
From: Arizona. Snowboarder. Happy Shredding.
Originally Posted by lash
Originally Posted by BillBoost37
Ok...I admit...I'm a crazed maniac...
Are you looking, Mr. Bean?
BTW Bill, thanks for starting this thread for the short list of junkyard tools to take. Me likey...
on topic, i have left countless tools in my engine bay. one time i kept slamming my hood closed trying to figure out why it wouldn't latch...i slammed it harder and harder until i realized i left a long handled standard screwdriver in there!
Senior Member
Certified Car Nut
Joined: Jul 2003
Posts: 15,408
Likes: 1
From: Robbinsdale, MN
Originally Posted by BillBoost37
Gloves..(mechanics for wimps...regular blue for us men.)
Senior Member
True Car Nut
Joined: Oct 2005
Posts: 7,030
Likes: 2
From: Central Florida
Originally Posted by BillBoost37
Originally Posted by lash
BTW Bill, thanks for starting this thread for the short list of junkyard tools to take. Me likey...
5.5mm whatever you have
7mm nutdriver
10mm deep socket
11mm socket (coil pack bolts L27)
13mm deep socket
15mm deep socket
Ratcheting wrenches on 10, 11, and 13
T15 torx driver
Hammer
3inch extension and 8 inch extension
Flexhead ratchet
Pick
Flat and Phillips screw drivers..big and small on both
Razor knife with extra blades
Cutters
Needle nose pliers
Regular pliers
Gloves..(mechanics for wimps...regular blue for us men.)
Thread Starter
DINOSAURUS BOOSTUS
Expert Gearhead
Joined: Mar 2005
Posts: 41,391
Likes: 30
From: Enfield, CT
Originally Posted by MOS95B
Originally Posted by BillBoost37
Gloves..(mechanics for wimps...regular blue for us men.)
Senior Member
True Car Nut
Joined: Jun 2004
Posts: 6,182
Likes: 0
From: Rochester, NY (college)
Originally Posted by harofreak00
dont forget the T50 for the selt belts on the 92-99, and for the supercharge belt tensioner pulley
i have also been using the 17mm for engine stuff lately
i have also been using the 17mm for engine stuff lately
Senior Member
Certified Car Nut
Joined: Jul 2003
Posts: 15,408
Likes: 1
From: Robbinsdale, MN
Originally Posted by BillBoost37
Originally Posted by MOS95B
Originally Posted by BillBoost37
Gloves..(mechanics for wimps...regular blue for us men.)
And, I notice you don't mention the Safety Torx (the ones with the hole in the tip) for sensors in your original list.
Senior Member
Certified Car Nut
Joined: Oct 2003
Posts: 19,756
Likes: 1
Originally Posted by BillBoost37
Originally Posted by captainmiller
I went back to an old bonnie once at a yard only to find my old cell phone on the floor, lmao. I've also left my keys on the strut tower of my bonne and drove around like that for a couple days with the spare set. I have also lost a ton of tools working on her...
BANNED
Joined: Mar 2004
Posts: 0
Likes: 5
From: Purgatory
Originally Posted by corvettecrazy
Originally Posted by harofreak00
dont forget the T50 for the selt belts on the 92-99, and for the supercharge belt tensioner pulley
i have also been using the 17mm for engine stuff lately
i have also been using the 17mm for engine stuff lately
Senior Member
Posts like a Corvette
Joined: Jun 2005
Posts: 1,596
Likes: 0
From: Berkeley, IL
Originally Posted by MOS95B
Originally Posted by BillBoost37
Originally Posted by MOS95B
Originally Posted by BillBoost37
Gloves..(mechanics for wimps...regular blue for us men.)
And, I notice you don't mention the Safety Torx (the ones with the hole in the tip) for sensors in your original list.
2. Cut your nails.