97 GP GT - GM Forum - Buick, Cadillac, Chev, Olds, GMC & Pontiac chat


General GM Chat When starting new posts, please specify YEAR, MAKE, MODEL, ENGINE type, and whatever modifications you have made. Chat about all things GM (and related cars). Off-topic stuff should be in the Lounge, and all Model specific mechanical problems should be posted in the proper forum.

Reply
 
 
 
Thread Tools Search this Thread
Old 04-22-2008, 05:12 PM   #1
Junior Member
Thread Starter
 
Toddster's Avatar
 
Join Date: Aug 2005
Posts: 0
Thanks: 0
Thanked 1 Time in 1 Post
Toddster is on a distinguished road
Default 97 GP GT

Hi guys,
need keyless remote programming insructions for 97 GP

Todd
Toddster is offline   Reply With Quote
Old 04-22-2008, 08:47 PM   #2
Junior Member
Thread Starter
 
Toddster's Avatar
 
Join Date: Aug 2005
Posts: 0
Thanks: 0
Thanked 1 Time in 1 Post
Toddster is on a distinguished road
Default

Nevermind:

Quote:
Important
Once entering this procedure, programming the first transmitter erases all previous transmitters. You must program all transmitters.
Program one vehicle at a time. One transmitter could be programmed into other vehicles that are also on program mode in close proximity.

Pull the MALL PGM Fuse.
Turn the ignition switch to the ACC position. The seat belt indicator flashes and the chime sounds 2, 3 or 4 times. This action identifies which type of BCM, is installed on the vehicle. Check that the BCM installed on the vehicle is compatible with all of the features on the vehicle. Keyless entry requires BCM type 3 or 4. Refer to Body Control Module Diagnostic Information in Body Control System for more information.
Turn the ignition switch from the ACC position to the OFF position, then back to the ACC position within 1 second. This action causes the BCM to enter the diagnostic/program mode. The BCM may flash and chime Diagnostic Trouble Codes (DTCs). The number of flashes and chimes equals the DTC number. If there are DTCs in memory, record the DTCs. Then refer to Body Control Module Diagnostic Information in Body Control System for more information.
Open and close any vehicle door. You should hear a chime if you are in the diagnostic/program mode. If unable to enter diagnostics, refer to Body Control Module Diagnostic Information in Body Control System for more information.
Press and hold the lock and unlock buttons at the same time on the keyless entry transmitter for 14 seconds.
At the 7-second mark, you may hear a chime. This chime feedback indicates that the transmitter has been resynchronized.
Continue holding the lock and unlock buttons until hearing another chime around the 14-second mark. This chime feedback indicates that the transmitter has been programmed successfully.
Repeat step 5 for the rest of the transmitters (for a total of 4 transmitter).
Exit the BCM diagnostics/programming mode:
Turning the ignition switch to the LOCK position.
Reinstall the MALL PGM Fuse.
found it
Toddster is offline   Reply With Quote
 
 
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 06:45 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.