General GM Chat When starting new posts, please specify YEAR, MAKE, MODEL, ENGINE type, and whatever modifications you have made. Chat about all things GM (and related cars). Off-topic stuff should be in the Lounge, and all Model specific mechanical problems should be posted in the proper forum.

96 bonneville non s/c stalls

Thread Tools
 
Search this Thread
 
Old Nov 24, 2011 | 04:09 PM
  #1  
99z28's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2011
Posts: 3
Likes: 0
From: akron ohio
99z28 is on a distinguished road
Default 96 bonneville non */c stalls

I currently have 2 96 bonneville se'* one of they currently stalls when ever it feels like it no warning prior to stalling i have swapped pats from car to car trying things i have tryed the maf sensor,tps sensor,ingnition module,iac motor it has also had the ckp sensor replacer last summer the car has a hard start i beleive due to bad check ball in fuel pump i was woundering if anybody has had this problem or any ideas because i really dont know where to go with it it also has no dtc'* (check engine light)
Reply
Old Nov 24, 2011 | 08:03 PM
  #2  
Danthurs's Avatar
Retired Senior Admin

Expert Gearhead
 
Joined: May 2006
Posts: 29,661
Likes: 43
From: Sheboygan Wisconsin
Danthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to all
Default

I was going to say crank sensor, but you did that. Check the battery cables. They tend to corrode and can cause stalls. Also check the ground under the ICM.
Reply
Old Nov 24, 2011 | 08:20 PM
  #3  
99z28's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2011
Posts: 3
Likes: 0
From: akron ohio
99z28 is on a distinguished road
Default

i cleaned under the ignition module with a die grinder and used die electric grease i also forgot to mention it will fire right up with no hesitation i just put into neutral and start it up as im moving
Reply
Old Nov 24, 2011 | 08:36 PM
  #4  
Danthurs's Avatar
Retired Senior Admin

Expert Gearhead
 
Joined: May 2006
Posts: 29,661
Likes: 43
From: Sheboygan Wisconsin
Danthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to all
Default

There should be another ground under the ICM mounting plate. It'* the ground for the ignition wiring harness.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mortehl
1992-1999
8
Nov 23, 2010 06:49 PM
twotimeskc
1992-1999
2
Feb 5, 2006 05:19 PM
rh72
1992-1999
4
Jul 6, 2005 04:10 PM
BREWSKI1
1987-1991
11
Feb 13, 2005 11:49 AM
dspman67
1992-1999
5
Sep 14, 2004 01:28 PM




All times are GMT -4. The time now is 04:14 PM.