General GM Chat When starting new posts, please specify YEAR, MAKE, MODEL, ENGINE type, and whatever modifications you have made. Chat about all things GM (and related cars). Off-topic stuff should be in the Lounge, and all Model specific mechanical problems should be posted in the proper forum.

3.8 rebuild problem

Old Oct 3, 2011 | 07:27 PM
  #1  
FLYNN's Avatar
Thread Starter
Junior Member
Posts like a Ricer Type-R
 
Joined: Oct 2010
Posts: 10
Likes: 0
FLYNN is on a distinguished road
Default 3.8 rebuild problem

i have recently replaced the lower end new crank berrings lifters and oil pump i am getting a knock at low idle it sounds like lifters not pumped up so i replaced them and the oil pump still hearing the noise any sugestions
Reply
Old Oct 3, 2011 | 07:37 PM
  #2  
Danthurs's Avatar
Retired Senior Admin

Expert Gearhead
 
Joined: May 2006
Posts: 29,661
Likes: 43
From: Sheboygan Wisconsin
Danthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to all
Default

Is the noise on the top or bottom of the engine? Is it there all the time or just when you give it gas or just get off it? Does it sound anything like this?

Attached Thumbnails 3.8 rebuild problem-th_m4h03825.jpg  
Reply
Old Oct 3, 2011 | 07:48 PM
  #3  
FLYNN's Avatar
Thread Starter
Junior Member
Posts like a Ricer Type-R
 
Joined: Oct 2010
Posts: 10
Likes: 0
FLYNN is on a distinguished road
Default

its on the top end in the center at idle if u give it 100 rpm more it goes away
Reply
Old Oct 3, 2011 | 07:49 PM
  #4  
FLYNN's Avatar
Thread Starter
Junior Member
Posts like a Ricer Type-R
 
Joined: Oct 2010
Posts: 10
Likes: 0
FLYNN is on a distinguished road
Default

no it sounds like lifter tap
Reply
Old Oct 3, 2011 | 07:54 PM
  #5  
FLYNN's Avatar
Thread Starter
Junior Member
Posts like a Ricer Type-R
 
Joined: Oct 2010
Posts: 10
Likes: 0
FLYNN is on a distinguished road
Default

i did forget the harmonic balancer went bad
Reply
Old Oct 3, 2011 | 07:59 PM
  #6  
pbrktrt's Avatar
Senior Member
Posts like a 4 Banger
 
Joined: Aug 2011
Posts: 131
Likes: 0
From: muskegon, mi
pbrktrt is on a distinguished road
Default

Balance shaft perhaps?
Reply
Old Oct 3, 2011 | 08:06 PM
  #7  
FLYNN's Avatar
Thread Starter
Junior Member
Posts like a Ricer Type-R
 
Joined: Oct 2010
Posts: 10
Likes: 0
FLYNN is on a distinguished road
Default

how do u tell if the balance shaft or berrings are bad
Reply
Old Oct 3, 2011 | 08:11 PM
  #8  
Danthurs's Avatar
Retired Senior Admin

Expert Gearhead
 
Joined: May 2006
Posts: 29,661
Likes: 43
From: Sheboygan Wisconsin
Danthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to all
Default

If bearings are bad your oil pressure will drop. Use a stethoscope to track it down. Could be a simple noisy injector.
Reply
Old Oct 3, 2011 | 08:16 PM
  #9  
FLYNN's Avatar
Thread Starter
Junior Member
Posts like a Ricer Type-R
 
Joined: Oct 2010
Posts: 10
Likes: 0
FLYNN is on a distinguished road
Default

lower berrings are new balance shaft berrings wernt changed noise is in the center top of engine only at idle
Reply
Old Oct 3, 2011 | 08:17 PM
  #10  
FLYNN's Avatar
Thread Starter
Junior Member
Posts like a Ricer Type-R
 
Joined: Oct 2010
Posts: 10
Likes: 0
FLYNN is on a distinguished road
Default

oil presure is 55 60
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 07:20 AM.