180 vs 195 degree thermostat

Subscribe
Feb 17, 2007 | 11:58 AM
  #11  
I don't know. There are two small holes, I don't know what size.

But even with my old Bonnie, I had a 180 with no holes, and it still took a while to warm up in the winter.
Feb 17, 2007 | 03:18 PM
  #12  
I run a 160 year round....no problems....its warm enough for me even when its -2 outside I just let it war up before I drive it...
Feb 17, 2007 | 04:06 PM
  #14  
I run 180 year around, but when it gets below freezing I cover up half of the radiator with a towel so it will warm up better. Otherwise it will never get up to operating temperatures. The ssei takes forever to warm up, even with the towel comapared to the se.
Feb 17, 2007 | 07:05 PM
  #15  
It sounds like this is a generally good idea. Does that extend to the Northstar? (my other Bonneville)
Feb 17, 2007 | 07:09 PM
  #16  
it would altho it doesnt need it as bad....an all aluminum engine dissipates heat much better than a cast iron one
Feb 18, 2007 | 09:32 PM
  #17  
The only problem is that with a lower temp tstat, you may not get the engine hot enough to rid the moisture. Best thing to do when it is really cold outside, not make 1/2 mile trips. if you do, warm her up first. This will prevent future problems.
Feb 18, 2007 | 09:47 PM
  #18  
I need to fix my thermostat, im sure its stuck open, do thay have all thes option at autozone?[temps] or just on the net
Feb 18, 2007 | 09:56 PM
  #19  
autozone has got them.

these will work fine, and normally always do.

You can get specifically reinforced ones to prevent failure in the future online.

It is better to have it stuck open then closed...
Feb 21, 2007 | 09:47 AM
  #20  
Two bonnies - it came stock with a 195 for a reason; put another one in there. And no drilling. That is just not necessary.