17mm or 21mm sway? ( also bushing part # ) *Rear*
02-21-2007, 11:29 AM
#21
DINOSAURUS BOOSTUS
Expert Gearhead
I fear you will try to remove the bolts holding the bracket and the bracket and piece it mounts to will come off with a snap.
Are you prepped to weld if necessary?
Are you prepped to weld if necessary?
02-21-2007, 11:32 AM
#22
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
yup, i will be, cuz before i start im going to take a good look at ti and also use a allot of PB on it 
02-21-2007, 11:42 AM
#23
Guest
Posts: n/a
Lets get this right...
FE2-F41 on the 92-99'* used a 32mm front bar and a 21mm rear bar..
Bandit bone stock your car had an 18mm bar, the 18mm rear bar was F41-FE2 for the 87-91 Bonnevilles.... They all used the 32mm front bar for the F41-FE2
Over the years GM used a 14mm, 18mm and a 21mm rear bar...
For the front they use a 28mm, 30mm and a 32mm bar..
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
FE2-F41 on the 92-99'* used a 32mm front bar and a 21mm rear bar..
Bandit bone stock your car had an 18mm bar, the 18mm rear bar was F41-FE2 for the 87-91 Bonnevilles.... They all used the 32mm front bar for the F41-FE2
Over the years GM used a 14mm, 18mm and a 21mm rear bar...
For the front they use a 28mm, 30mm and a 32mm bar..
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
02-21-2007, 11:47 AM
#25
Guest
Posts: n/a
Originally Posted by bandit
so is there anyway my car can have the 28mm Front and the 14mm rear?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
02-21-2007, 11:49 AM
#26
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
ok cool, thanks Don
on lunch today im gonna see how much my local steelership will charge for the parts i need.
on lunch today im gonna see how much my local steelership will charge for the parts i need.
02-21-2007, 11:50 AM
#27
Guest
Posts: n/a
Bandit you are going to the 32mm front and 21mm rear right?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
02-21-2007, 12:00 PM
#29
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Ryan, if you strike out at the dealer (cause remember you will need to think about the front too, i recommend that you take a trip to the JY.....actually i would go there first
02-21-2007, 12:10 PM
#30
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
here in lies the problem.
its winter. and we have gotten 2 + feet of snow. junk yards are not a option right now :(
But i front is going to be here tomorrow, i got them from advance. but they dont have the rear.
its winter. and we have gotten 2 + feet of snow. junk yards are not a option right now :(
But i front is going to be here tomorrow, i got them from advance. but they dont have the rear.