Series 1 Pulley Source
Thread Starter
Senior Member
Posts like a Turbo
Joined: Sep 2004
Posts: 253
Likes: 0
From: Canton, Ga

willwren,
Thanks for the follow up. Hopefully, he will get better soon.
I sure hope I can find another source for that pulley if he decides to close the store for good.
JLathem
1992 SSEi
Thanks for the follow up. Hopefully, he will get better soon.
I sure hope I can find another source for that pulley if he decides to close the store for good.
JLathem
1992 SSEi
Thread Starter
Senior Member
Posts like a Turbo
Joined: Sep 2004
Posts: 253
Likes: 0
From: Canton, Ga

Well, I did receive the pulley from
http://www.bluetonguemotorsports.com
It seems they make them on a made to order basis. So it takes a few weeks,
They seem to do " production " runs on a monthly or bi-weekly basis.
Anyway, all is well. I'm suprised these things are so rare and hard to find.
Jlathem
http://www.bluetonguemotorsports.com
It seems they make them on a made to order basis. So it takes a few weeks,
They seem to do " production " runs on a monthly or bi-weekly basis.
Anyway, all is well. I'm suprised these things are so rare and hard to find.
Jlathem
Normally they're very easy to get. We used to have another company making them too, but we blacklisted them as a vendor, and they closed their doors soon after. I'm not sure I like the sound of the 2.3" pulley. It'll be interesting to see how much boost you gain.
Anymore word on a pulley source? I sold my 2.2" pulley a few months ago and now I want to re-pulley the car. I saw blue-tounge'* 2.3" and jlathem had stated that they make them on a made to order basis? I wonder if I could ask for a 2.2" pulley made to order.. Pulleyboys is still down :(
Thread Starter
Senior Member
Posts like a Turbo
Joined: Sep 2004
Posts: 253
Likes: 0
From: Canton, Ga

I spoke ( e-mail ) with the guy yesterday at Bluetooth. They still have 1 on hand.
He explained they do it in production " runs " .So as far as I can tell, they seem to
get a few folks that are interested and somebody machines them out for them.
JLathem
He explained they do it in production " runs " .So as far as I can tell, they seem to
get a few folks that are interested and somebody machines them out for them.
JLathem
Well I'd like a 2.2" pulley either way. A friend of mine is taking a machining class at a nearby university and he offered to make one for me, but we'll see how that goes. It'd take some work to make the keyway an exact fit.. Blue Tounge'* prices are cheaper by about $15, but I'd have to wait and see if they could make a 2.2" also.
Thread Starter
Senior Member
Posts like a Turbo
Joined: Sep 2004
Posts: 253
Likes: 0
From: Canton, Ga

Well I'd like a 2.2" pulley either way.
If you ever do find a 2.2 let us know.
JLathem


