question?????
Thread Starter
Senior Member
Posts like a Turbo
Joined: Oct 2005
Posts: 263
Likes: 0
From: Woodbridge, Va

so is the bca mod the one where u loosen three bolts push down and
retighten?????
this is safe???
a jet pcm will put the fuel range out of reach, which will make
moving the vacum line safe?????
which vacuum line is to be moved and to where?????
what is the turn all the way left trick???
what is WOT???
dont want to mess up my car.
retighten?????
this is safe???
a jet pcm will put the fuel range out of reach, which will make
moving the vacum line safe?????
which vacuum line is to be moved and to where?????
what is the turn all the way left trick???
what is WOT???
dont want to mess up my car.
Yes.
Yes.
I don't know, but you have a 92. Jet doesn't make one for you. Hypertech does. I hit my rev limiter in first with mine in performance mode, so the BCS bypass isn't too smart in my case.
Off the bottom of the black cylinder (BCA) and onto the second post on the BCS (might be a small foam filter on it.
Same as BCA mod?
Yes.
I don't know, but you have a 92. Jet doesn't make one for you. Hypertech does. I hit my rev limiter in first with mine in performance mode, so the BCS bypass isn't too smart in my case.
Off the bottom of the black cylinder (BCA) and onto the second post on the BCS (might be a small foam filter on it.
Same as BCA mod?
Originally Posted by jwikoff99
I never found a Jet chip for a 92 L67, and I looked high and low.
I found this:
http://www.stillen.com/sportscars_pr...pe=1&ClassID=2
Says SSEi in the trim column, but the chip description says SSE and MFI, doesn't mention supercharged... I don't know.
http://www.stillen.com/sportscars_pr...pe=1&ClassID=2
Says SSEi in the trim column, but the chip description says SSE and MFI, doesn't mention supercharged... I don't know.
Thread Starter
Senior Member
Posts like a Turbo
Joined: Oct 2005
Posts: 263
Likes: 0
From: Woodbridge, Va

i have a 96 ssei
does this change any thing???
there is no hose on bottom....
there is a vacuum hose on the left and a bigger black hose on the right .
On the black box in front of the black round thingamagigger is a connector
w/ nothing on it. is that where i move the vacuum hose
does this change any thing???
there is no hose on bottom....
there is a vacuum hose on the left and a bigger black hose on the right .
On the black box in front of the black round thingamagigger is a connector
w/ nothing on it. is that where i move the vacuum hose
This is where I got my JET chip earlier this year. I have the 19303S. I am unsure of the difference'*. They did not have the 19320 listed at the time. You would want to call JET and verify your application before ordering.
http://store.summitracing.com/defaul...+-59144+-42535
So I was curious about the new part# and I called JET. They are the same, but programmed for different broadcast codes on your MEMCAL (four letter designation on the stock chip in your PCM). You have to call JET to get the right part # and they DO have one for a 92 application.
Sorry for the highjack.
The BCA mod is safe. From what I understand, it just gets you into boost sooner. The boost bypas trick is a little different. I believe it disables the boost wastegate and gives you full boost entirely, which could lead to some serious issues. This should help.
http://www.bonnevilleclub.com/forum/...ic.php?t=40712
http://store.summitracing.com/defaul...+-59144+-42535
So I was curious about the new part# and I called JET. They are the same, but programmed for different broadcast codes on your MEMCAL (four letter designation on the stock chip in your PCM). You have to call JET to get the right part # and they DO have one for a 92 application.
Sorry for the highjack.
The BCA mod is safe. From what I understand, it just gets you into boost sooner. The boost bypas trick is a little different. I believe it disables the boost wastegate and gives you full boost entirely, which could lead to some serious issues. This should help.
http://www.bonnevilleclub.com/forum/...ic.php?t=40712


