Pulley Puller
07-15-2006, 12:41 PM
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Jul 2006
Location: CHICAGO
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Pulley Puller
Is their any other pullers out their that don't cost over $100? I want to change my pulley but the puller costs more then the pulley itself.
07-15-2006, 12:47 PM
#2
Junior Member
Posts like a Ricer Type-R
No there isn't. Your pulley is aluminum, and is press fit onto the shaft. You need a puller that will fully support the back face of the pulley so you don't damage it.
07-15-2006, 12:48 PM
#3
Senior Member
True Car Nut
Join Date: Jan 2003
Location: Bonney Lake/Ellensburg, Washington- WCBF '04, '05, '06, '07 Survivor-
Posts: 7,099
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
No there isn't. Your pulley is aluminum, and is press fit onto the shaft. You need a puller that will fully support the back face of the pulley so you don't damage it.
07-16-2006, 04:51 PM
#5
Senior Member
Posts like a Northstar
Join Date: Jul 2006
Location: Meridian, ID
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
Definately rent it. Don't try to get it off without the 3800 pulley puller. It is a lot of money but totally worth it. It will not come off without it and you will destroy your */C. After you see one of these things work you will understand why. Plus, if you have never done it before I would recommend you get someone to help you that has because it is a little tricky if you don't know how to set it up.
07-16-2006, 04:55 PM
#6
Junior Member
Posts like a Ricer Type-R
Keep in mind we're talking about Series 2 from 96-current production with the M90 ONLY.
The 91-95 L67 can use a standard 3-jaw puller, as the pulley is keyed, not pressfit.
The 91-95 L67 can use a standard 3-jaw puller, as the pulley is keyed, not pressfit.
Thread
Thread Starter
Forum
Replies
Last Post
Buickman104
Forced Induction
6
05-08-2006 06:56 PM
Chad V
Performance, Brainstorming & Tuning
4
07-26-2005 09:01 PM