What pulley, plug, and gap are you running?

92/93 pulley on a gen 3, TR55 at .055

I'm running the same on the 95 with the stock pulley, out of convenience.

I have TR55'* in the SSEi as well, since I wasn't planning on going this small in pulley size. TR6'* would probably be a better choice right now, and particularly so since I'm going to try the 2.0" pulley soon.

Last time I ran TR6'* (2 ranges colder) I gapped them at .050", simply because the V-Power plugs tend to jump the gap better than a traditional plug, and I have slightly hotter coils than most.

3.4 S2 M90,TR55 IridiumIX,gapped .060

2.55 pulley on gen 3 M62, NGK Tr-55, Gapped to .55

Ac Delco race plugs (1 1/2 ranges colder then stock) @ .053 with a 3.4" pulley

Modified Autolite 103 @ .045" with a 2" pulley on a Gen 2 M62.

Bump. Let'* see some more two and three ranges colder.

2.5 Pulley, TR-6'* gapped at .55, on MSD coils and wires.

Series 2 motor:

Autolite 104 (2 ranges colder) @ .050"
3.4" pulley