see if that is a stock pully on it

An open boost control solenoid driver circuit, ignition feed circuit, or boost control solenoid valve stuck open will cause reduced engine power, especially during wide open throttle operation.

The boost control solenoid driver circuit shorted to ground, boost control solenoid valve stuck closed or a restriction in the boost source or signal hoses will cause full boost to be commanded at all times and a possible overboost condition during high engine load situations.

A restriction in the vacuum signal hose to the bypass valve actuator or a stuck closed bypass valve will cause a rough idle and reduced fuel economy.

Heres a pic of the map sensor assembly.


Disconnect the MAP sensor electrical connector (2) from the MAP sensor (1).
Carefully bend the locking tabs holding the MAP (1) sensor to the PCV valve cover (3) just enough to remove the MAP sensor.
Pull the MAP sensor straight out of PCV valve cover.

you need a buddy to take some pics while you are driving!

Looks like he solved it.

http://www.bonnevilleclub.com/forum/...ic.php?t=15638