I need the dimensions of the SC outlet port on a 95/95 SC, as well as the inlet port diameter behind the throttle body. Pics would be appreciated.

I'm interested in the height and width of the triangular outlet port, as well as the vertical height before it turns towards the point on the TB end.

In addition, the overall diameter of each rotor chamber half, and the total inside width of the two combined.

Maybe if mine hadn't been "modified" by a supplier to remain nameless...

John, I'd like pics of yours anyway, and dimensions. Next time you tear it down. Get some in/out closeups like I did on mine.

I have an idea for you

Will do. Maybe in a couple weeks.

What'* the idea?

I can get some TB shots when I swap my TB with Gordy'* next weekend.

I can get some info when I pull mine engine out in a week or so.

I just changed my Supercharger today, I will take pics for you tomorrow when I get home, Bill.

With a ruler! I need DIMENSIONS of the outlet port and inlet diameter. Pics also.

I'm increasing compression of the SC, and need to know the differences between the 92/93 and 94/95 inlet and outlet, in order to predict heat increases. I'm planning ahead for KR, and may need to increase my pulley size in order to make up for the increased efficiency of my blower.

Gordy and I should be able to get you anything that you need to know involving this on Saturday.