M62 Snout Rebuild
09-10-2009, 06:45 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2009
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
M62 Snout Rebuild
I need to replace the seal and will do the bearings also. I have the snout off the SC and have pulled the pulley. It looks like there is a washer that will not come off. What am I missing?
09-10-2009, 09:34 PM
#2
Senior Member
Posts like a Turbo
Join Date: May 2009
Location: OHIO
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
It is held in Place by a snap ring you need to have snap ring pliers to take it off it holds the seal in place.
Last edited by trixster68; 09-10-2009 at 09:35 PM. Reason: spelling
Thread
Thread Starter
Forum
Replies
Last Post
