Shift indicator lights and power locks malfunctioning
Originally Posted by MyLittleBlackBird
The MLPS is under the master cylinder on the drivers side of the car if I'm not mistaken. I may have kicked it when I was standing on the trans case.
Doug, do you have an idea of what we should look at on Saturday?
Originally Posted by big_news_1
Doug, do you have an idea of what we should look at on Saturday?
(Sorry..needed a little humor)
Originally Posted by lash
If you mean broken wires at the connector, then yes, I see it. 

But I can't be mad at Doug for doing it. He was busting his butt to stand on my tranny and wrench on my rear manifold.
Doug, I'll head over to Carney'* and snag a new pigtail like you said. Can you bring a soldering iron? Mine is out at my parents' if you want to get it.
Originally Posted by MyLittleBlackBird
Go to the junkyard and get a new pigtail and we'll solder it in this weekend.
And for the record. That one isn't my fault. It'* too far back in the engine bay. I didn't kick it.
And for the record. That one isn't my fault. It'* too far back in the engine bay. I didn't kick it.
That could certainly explain some of the troubles you're having, Ben.
Originally Posted by MyLittleBlackBird
And for the record. That one isn't my fault. It'* too far back in the engine bay. I didn't kick it.
I'd say size 8 Reebok!
Senior Member
True Car Nut
Joined: Jan 2005
Posts: 3,882
Likes: 2
From: Montevideo, MN MWBF '05, '06, '07 WCBF '06 '07 survivor

Originally Posted by big_news_1
Originally Posted by lash
If you mean broken wires at the connector, then yes, I see it. 

But I can't be mad at Doug for doing it. He was busting his butt to stand on my tranny and wrench on my rear manifold.
Doug, I'll head over to Carney'* and snag a new pigtail like you said. Can you bring a soldering iron? Mine is out at my parents' if you want to get it.






