https://www.gmforum.com/t278901/

Attempted programming an old key fob for a gm something... lol not the right number for the bonnie but thats not my interest

I was reading that on some cars when jumpering the plug you need a FUSED wire... is that so with the 94s & 95s? i only ask because the step where it locks/unlocks the doors to let you kno its ready... never happened and i know its got the transmitter... at least its suppose to according to the vin

The fused wire is just to prevent a dead short. It shouldn't effect the programing. Can you tell if you have a wire going to ports 1 and 4? Also, make sure you got the right ports. They are small and it'* a bit cramped.

There is one on 4 but it didnt look like a plug was in the connector to 1...

Better let Toddster chim in here. But looking at the pin out, 1 is not used, 8 is the keyless pin

Ill wait for him to get here and for myself to get off work before playing but are you thinking id need to jumper 4 to 8 to set it???

That'* what it looks like. Go to tech info and look in specs and look at OBD1 pin out. That should be your setup.

I had the same problem the first time I reprogrammed a remote for my 95 SSE.
There ended up being no problem but me.
I'm like why is there no pin in #1 but then I realized I was looking at the pin out up side down.

Take another look...lol

Not saying thats your problem but hey no one ever said we're perfect.

lol its ok... 94s are different i guess... or maybe its just mine...

i tried 4 to 8 and boom... lock/unlock and it was ready... now i just gotta wait til the fob comes in and cross my fingers

will post when i get it to work, or with futher problems lol

That'* way I said look at the pin out. 8 is the keyless pin. glad it worked for you. Now just hope it goes smooth when you program the new FOB.

cool good job!