New A/F gauge
#1
Senior Member
Certified Car Nut
Thread Starter
New A/F gauge
I just got a new Autometer A/G gauge, carbon fiber face to match the trim. But no instructions. There are three wires. Red goes to 12V+, black to 12V- or ground, and purple. Same color as the lead to the O2 sensor, so I asume I splice it into that. Just piggyback it, or what?
#7
Senior Member
Certified Car Nut
Thread Starter
That'* ok, I've done my fair share of wiring in the past. Anyone have an opinion of where I should get my 12V from?
Now If my pillar pod from DP would show up...
Now If my pillar pod from DP would show up...
#8
Senior Member
Certified Car Nut
An easy 12v in the dash is the cig lighter. Also you could run from the fuse panel under the steering column.
Allmachtige and I were talking about these gauges. You're best bet is to hook it up to the car wiring, not the o2 sensor. So when you change sensors, it still works,
Allmachtige and I were talking about these gauges. You're best bet is to hook it up to the car wiring, not the o2 sensor. So when you change sensors, it still works,
Thread
Thread Starter
Forum
Replies
Last Post
JLAudioEclipse
Your Ride: GM Pictures & Videos
27
08-04-2005 11:01 PM