Need PCM Connector info 1993 SSEi...Help
09-18-2006, 05:42 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2006
Location: Orangeville, Ontario, Canada
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Need PCM Connector info 1993 SSEi...Help
Have a 1993 SSEi that the PCM fried taking with it the middle of the three connectors (totally melted). Have bought a new PCM and middle connector, but I found out that GM uses the same color wire more than once in this connector. I had found a connector wiring diagram for a 92 SE in tech info, but the wire colors / qty are different for the 93 SSEi that I have. Can anyone send me the connector info please so that I can begin to ring out which wire is which. Thanks, Paul
09-18-2006, 05:45 PM
#2
Junior Member
Join Date: Apr 2006
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Well I think before you put in the new PCM, you should find out why your connector melted like that. I have not heard of that happening to anyone without being a very severe problem.
09-18-2006, 05:50 PM
#3
Junior Member
Thread Starter
Join Date: Mar 2006
Location: Orangeville, Ontario, Canada
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
I intend to ring out all wires in that connector and see if I can isolate the cause. However need to know where each wire goes first.
Thread
Thread Starter
Forum
Replies
Last Post
rumroom
1992-1999
8
10-18-2008 05:50 PM