Help please! Module issues ***UPDATED - Nov 5 w/pics***
#11
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: May 2006
Location: Ottawa, ON Canada
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Well everyone, I am having no luck :(
I checked both driver'*/passenger side Busses. The dr. side was pretty much brand new looking inside and out, the passenger side as you can see from the pics below had a little corrusion so I used the sandpaper as suggested and cleaned it off yet no luck
Here is a pic of the drivers side ground buss
Another of driver'* side buss (looked good)
Passenger side (corrusion)
Now this last picture is to show where I pulled those 2 modules I have pictured in my above post from. I still haven't had anyone to help out in identifying what these are? I've had them both out of my Bonny for over a week now and haven't noticed anything change so thats why I'm beginning to think one or both of these are fried?? Can someone PLEASE help me out!!! Anymore suggestions????
Taken from passenger floor up under the dash area. PCM and fuse area shown and the 2 mentioned modules were positioned between them
I checked both driver'*/passenger side Busses. The dr. side was pretty much brand new looking inside and out, the passenger side as you can see from the pics below had a little corrusion so I used the sandpaper as suggested and cleaned it off yet no luck
Here is a pic of the drivers side ground buss
Another of driver'* side buss (looked good)
Passenger side (corrusion)
Now this last picture is to show where I pulled those 2 modules I have pictured in my above post from. I still haven't had anyone to help out in identifying what these are? I've had them both out of my Bonny for over a week now and haven't noticed anything change so thats why I'm beginning to think one or both of these are fried?? Can someone PLEASE help me out!!! Anymore suggestions????
Taken from passenger floor up under the dash area. PCM and fuse area shown and the 2 mentioned modules were positioned between them
#12
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: May 2006
Location: Ottawa, ON Canada
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by markwb
I'm sure your car is equipped with a BCM. The fact that you can manually turn on interior lights indicates that the BCM may be faulty. RAP is what maintains power to radio & pwr windows after ign. off.
Now, I've read that the RAP is to have a white 10-pin connector, is this the RAP module out of my car??? (Whtie 10-pin connector on the right)
#14
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: May 2006
Location: Ottawa, ON Canada
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1993 SLE
that is the Keyless and the RAP module
#15
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
this module should be found in all 93-95 Bonnes that have the RAP AND the keyless....the module is the same for the non keyless bonnes the only difference is that the non keyless bonnes dont have the reciever on the inside and dont have the connectors....
you need to be sure that the module you get has the same FCC ID number....302R OR 303R will work....and it also needs to have the 3 connectors
you need to be sure that the module you get has the same FCC ID number....302R OR 303R will work....and it also needs to have the 3 connectors
Thread
Thread Starter
Forum
Replies
Last Post