electrical gremlins
#1
electrical gremlins
Hi all,
I'm new to the list and have some problems with my 95 SSEi. It started when the moonroof failed to open and the passenger door would not lock, then the fog light would remain on and the horn would beep repeatedly at start up.
I found a few posts which mention the ground buss bars as a possible cause(corrosion on contacts) for symptoms comparable to mine. What I would like to know is the location of these busses on my 95 and how I can get to them, I do not want to force any of the plastic interior pieces as I'm sure to do some damage.
Thanks in advance for any help and direction sent my way,
Sincerely, Lew Wallace
I'm new to the list and have some problems with my 95 SSEi. It started when the moonroof failed to open and the passenger door would not lock, then the fog light would remain on and the horn would beep repeatedly at start up.
I found a few posts which mention the ground buss bars as a possible cause(corrosion on contacts) for symptoms comparable to mine. What I would like to know is the location of these busses on my 95 and how I can get to them, I do not want to force any of the plastic interior pieces as I'm sure to do some damage.
Thanks in advance for any help and direction sent my way,
Sincerely, Lew Wallace
#2
Senior Member
Posts like a Turbo
Join Date: Oct 2006
Location: Kansas City, MO
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
Here ya go:
http://www.bonnevilleclub.com/forum/...ht=ground+buss
I recently checked mine out, they are located on both driver and passenger side.
http://www.bonnevilleclub.com/forum/...ht=ground+buss
I recently checked mine out, they are located on both driver and passenger side.
#3
electrical gremlins
Hi again and thanks for all those who responded to my post.
Problem solved !!! It was indeed the ground buss connector on the passenger side. Some light sanding and a good dose of dielectic grease and she'* good to go!
My wife thinks I'm a genious due to this forum, I can't thank you folk enough.
Best Regards, Lew
Problem solved !!! It was indeed the ground buss connector on the passenger side. Some light sanding and a good dose of dielectic grease and she'* good to go!
My wife thinks I'm a genious due to this forum, I can't thank you folk enough.
Best Regards, Lew
Thread
Thread Starter
Forum
Replies
Last Post
wam319
Everything Electrical & Electronic
13
05-25-2004 06:29 PM