Lo's staying on when I turn on brites
#1
Lo'* staying on when I turn on brites
My lo lights are staying on when I turn on my brights. This didn't happen before I put in the aftermarket xenon headlights. Any suggestions? or does anyone else have this same problem. It'* actually only a problem because I've been trying to re-position my headlights, and I'm havin a hard time because both the brights and lo'* are on.
#2
Senior Member
Posts like a Turbo
Join Date: Aug 2006
Location: bloomington, IN
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
My lo lights are staying on when I turn on my brights
#5
awesome, i was worried that something was wrong, right on. Thanks, and that card board trick is pretty technical. lol, i was actually having my brother stand in front of the one light when i aimed the other. Thanks again.
#6
RIP
True Car Nut
If you do cover the lens, do it only for a short time. This is part of a TSB regarding the headlamp assembly.
Also, crazing or deformations of the lens may occur if a shop mat or fender cover is draped over the fender and covers a portion or all of the headlamp assembly while the DRL or headlamps are on. This action restricts the amount of heat dissipated by the headlamps.
Once a heat buildup is generated by the headlamp, a degradation of the headlamp lens begins. This degradation of the lens can be unnoticeable at first and eventually manifest as spider cracks. In more extreme cases, it will begin to melt the lens of the headlamp.
Once a heat buildup is generated by the headlamp, a degradation of the headlamp lens begins. This degradation of the lens can be unnoticeable at first and eventually manifest as spider cracks. In more extreme cases, it will begin to melt the lens of the headlamp.
Thread
Thread Starter
Forum
Replies
Last Post
looking4quad
Everything Electrical & Electronic
5
01-11-2005 12:37 PM