Changing Corner Lights
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2006
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
Changing Corner Lights
Hi!
I am planning to replace a broken front corner lamp assembly. Is there anything in particular I need to look out for, or is the process pretty straightforward?
Thanks for the info!
I am planning to replace a broken front corner lamp assembly. Is there anything in particular I need to look out for, or is the process pretty straightforward?
Thanks for the info!
#3
DINOSAURUS BOOSTUS
Expert Gearhead
The thumb screws will probably require a good pair of pliers. When reinstalling add a dab of antiseize compound to lube them from having the issue again.
#5
DINOSAURUS BOOSTUS
Expert Gearhead
Should be easy and straightforward. If you can..you might want to spray the threads on those thumbscrews with PB Blaster today before the light arrives. I've seen two where the bracket threaded insert turned because they were stuck so badly.
#7
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2006
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
No...not yet! Sheeesh...give a guy a chance willya?
I plan on doing that, plus change a trans mount in my Saturn this weekend. But dont worry...I am sure it wont be hard.
I will have to post a replacement photo for that one where you noticed the broken one in the first place!
Thanks,
John
PS. I posted some early mpg results after I changed the O2 sensor in my mpg thread. The change seems to be remarkabke!
I plan on doing that, plus change a trans mount in my Saturn this weekend. But dont worry...I am sure it wont be hard.
I will have to post a replacement photo for that one where you noticed the broken one in the first place!
Thanks,
John
PS. I posted some early mpg results after I changed the O2 sensor in my mpg thread. The change seems to be remarkabke!
Thread
Thread Starter
Forum
Replies
Last Post