BOOST gage
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Nov 2004
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
BOOST gage
the owners manuel says that the boost needle should be at zero ( centre ) the gage says on the boottom left -70 center- 0 bottom right -70 well mine stays at the bottom left in idle is this fine or is the needle screwed up, thanx
#2
The boost gauge indicates the pressure or vacuum in your intake manifold.
At idle or lift throttle, it will show full vacuum or -70 kPa.
As you put your foot into the throttle and load up the engine, the vacuum will drop (pressure will rise) and the boost will pressurize the intake towards +70 kPa.
It should not normally read 0.
At idle or lift throttle, it will show full vacuum or -70 kPa.
As you put your foot into the throttle and load up the engine, the vacuum will drop (pressure will rise) and the boost will pressurize the intake towards +70 kPa.
It should not normally read 0.
Thread
Thread Starter
Forum
Replies
Last Post
Toddster
Trouble shooting + Test Procedures
0
03-21-2009 06:24 PM
DanCulkin
Performance, Brainstorming & Tuning
14
07-02-2007 11:02 AM
gizmo
Everything Electrical & Electronic
6
07-04-2005 12:13 AM