'99SE 3.8 Fuel pump, windows, pwr seats and door locks
Senior Member
True Car Nut
Joined: Aug 2004
Posts: 3,067
Likes: 1
From: In your garage, swipin' da lug nutz

I would try this before starting a new thread -
Take your car to a carwash, and make sure to bring several quarters with you!! Before getting out of your car, turn your heat or a/c on full blast, and get out of the car. Soap up the car and watch for any bubbles that may form around the windshield, door openings, window trim, etc. Where bubbles are forming is where water is getting in when the cabin isn't pressurized (I.E. when the heat/a/c fan isn't running). It may not pinpoint where, but it will get you in the general area of the point of entry.
Old trick I learned while working at Ford dealership body shop to isolate wind noises
Take your car to a carwash, and make sure to bring several quarters with you!! Before getting out of your car, turn your heat or a/c on full blast, and get out of the car. Soap up the car and watch for any bubbles that may form around the windshield, door openings, window trim, etc. Where bubbles are forming is where water is getting in when the cabin isn't pressurized (I.E. when the heat/a/c fan isn't running). It may not pinpoint where, but it will get you in the general area of the point of entry.
Old trick I learned while working at Ford dealership body shop to isolate wind noises
Thread
Thread Starter
Forum
Replies
Last Post
2000BonnieSSEI
Everything Electrical & Electronic
19
Jan 2, 2010 12:08 AM
Goo551
1992-1999
1
Jan 21, 2006 05:53 PM
gene254
1987-1991
3
Jul 7, 2004 08:42 AM



