hey guys!
I have a '92 3800SC engine from an SSEI. in my Fiero.

i want to reflash the eprom.

what programs do i need?
what programer? (model? and were to get ,prefferably in Canada)
What eprom does it use? Were to get?

Anything i should know?

I want to remove pass key, ABS warnings and other trouble codes not present in the Fiero. I also want to make 2 chips, one with normal boost and one for 100% boost all the time (for the track)


Thanks!
Eric

You'll need a custom one, flashing it is not really possible, unless you like coding programs... In which case, share with us!

I have Tuner Cat. that can modify an existing bin file and then dump it in a new chip.

I just need the burner.. somone recomended an EMP-10 but I'm having a hard time finding one. :(

here is a pic of the programmer:

what is the model code of the 92 ECM?

and the eprom model number as well if you have it. it'* a mem-cal unit right?

cheers!
Eric

I believe it'* a memcal unit, Some of these EProms are different year by year, so i'd definetly talk to a dealer on this one....

Please read the duplicate post in the 92-99 forum. Double post.