will these fit on my 95 se?
#1
Senior Member
Certified GM nut
Thread Starter
Join Date: Jan 2007
Location: allentown, pa--brooklyn, ny
Posts: 1,646
Likes: 0
Received 0 Likes
on
0 Posts
will these fit on my 95 se?
hi i want to change my tail lights and trunk lights to the ssei style lights with the black pin striping across the lights.. and i need to no what year tail lights will fit my 95 se. ? and does it matter between the se and the ssei tail lights.? are they different in mounting and fitting?
#3
DINOSAURUS BOOSTUS
Expert Gearhead
It should be noted that some of the years 92-93 IIRC had smaller studs on the tails and therefore you want to ensure you have the proper hardware (nuts) to mount them on the car.
it is possible to swap up to the 96-99 style lights as well if you swap the trunk lid and the trunk hinges.
it is possible to swap up to the 96-99 style lights as well if you swap the trunk lid and the trunk hinges.
#4
Junior Member
Posts like a Ricer Type-R
Ahem.....
http://www.bonnevilleclub.com/forum/...ic.php?t=81769
One of those is a 95 SE. And the stud size is talked about in that topic.
I'll move this topic to Detailing and Appearance for you.
http://www.bonnevilleclub.com/forum/...ic.php?t=81769
One of those is a 95 SE. And the stud size is talked about in that topic.
I'll move this topic to Detailing and Appearance for you.
#5
Senior Member
Certified GM nut
Thread Starter
Join Date: Jan 2007
Location: allentown, pa--brooklyn, ny
Posts: 1,646
Likes: 0
Received 0 Likes
on
0 Posts
if i swap the 96-99 style light and trunk with hinges.
will it be an easy dirrect bolt on to the old trunk hinge holes? or would i have to make new holes for the new hinges?
will it be an easy dirrect bolt on to the old trunk hinge holes? or would i have to make new holes for the new hinges?
#6
Senior Member
Certified GM nut
Thread Starter
Join Date: Jan 2007
Location: allentown, pa--brooklyn, ny
Posts: 1,646
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
Ahem.....
http://www.bonnevilleclub.com/forum/...ic.php?t=81769
One of those is a 95 SE. And the stud size is talked about in that topic.
I'll move this topic to Detailing and Appearance for you.
http://www.bonnevilleclub.com/forum/...ic.php?t=81769
One of those is a 95 SE. And the stud size is talked about in that topic.
I'll move this topic to Detailing and Appearance for you.
anyway so all you are saying i have to do is take the nuts with what ever pair of tail lights i choose to take? and then add some washers i would believe? thats if the bolts are different than mine
#8
DINOSAURUS BOOSTUS
Expert Gearhead
Randman and I helped Jimmyfloyd when he made the swap. It'* pretty straight forward to redo. Only thing he had was the car had the lamp monitor (SSE/SSEi) and I'm not sure if he ever hooked up all the lights. That coudl be circumvented easily though.
#9
Senior Member
Certified GM nut
Thread Starter
Join Date: Jan 2007
Location: allentown, pa--brooklyn, ny
Posts: 1,646
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
You posted it in Performance and Brainstorming.
Thread
Thread Starter
Forum
Replies
Last Post
Djomla
Performance, Brainstorming & Tuning
3
09-24-2003 08:36 AM