VHT
Senior Member
Posts like a Turbo
Joined: Sep 2006
Posts: 417
Likes: 0
From: Tampa, Florida, USA
Originally Posted by Plurr
It sprays on like paint, but think of it kind of like a tinted clear coat. You can make it as dark or light as you want since you can choose how many coats you want to put on it. You can mask off parts of the taillights that you want to be kept clear if you want. It is sold in a spray can and you might need a couple of cans to do it if it is on a 2000 or later model
Senior Member
Posts like a Turbo
Joined: Feb 2007
Posts: 330
Likes: 0
From: St. Louis, MO
one can may be enough. i did 1.5 heavyish coats. you can probly do 2-3 coats outta one can. its good to have too much, it would REALLY suck if you run out mid coating. you may need to clearcoat, too. i masked off my clear upper sections, tinted the bottom part, then took off masking tape, sanded the "tapeline" with 600 grit. then wetsanded the whole tinted section with 1000 grit. then clearcoated it.
Senior Member
Posts like a Turbo
Joined: Feb 2007
Posts: 330
Likes: 0
From: St. Louis, MO
i just used rustoleum clear coat. its not bad, but the nozzle is old skool, not the nicer ones with the fan spray pattern(its easier to overspray with that type). and i WET sanded between coats with 1000 grit.
Thread Starter
Senior Member
Posts like a Northstar
Joined: Dec 2005
Posts: 740
Likes: 0
From: jersey
I'm gonna have my sisters bf spray clear coat on it at his shop, he has some better type then the can stuff...How far down should he sand? How would he know hes that far? and what snadpaper should he use?
