Tinted some tails!
Well all it'* the best VHT nigtshade job ever!
I started by taking the DOT markings off for a cleaner look and wet sand it all out first then mask and clean real good i use dish soap water mix while wet sanding to keep them clean and then lay a coat of VHT wet sand and repeat till desired darkness then on to the clear and also wetsanding between coats and then finishing with buffing compound then polishing compound and a couple coats of good wax and bam done!
Remember the secret to any good paint job is in the prep!!!
I started by taking the DOT markings off for a cleaner look and wet sand it all out first then mask and clean real good i use dish soap water mix while wet sanding to keep them clean and then lay a coat of VHT wet sand and repeat till desired darkness then on to the clear and also wetsanding between coats and then finishing with buffing compound then polishing compound and a couple coats of good wax and bam done!
Remember the secret to any good paint job is in the prep!!!
Thread
Thread Starter
Forum
Replies
Last Post
YoungGunLs1
Your Ride: GM Pictures & Videos
31
Feb 6, 2010 08:37 PM
ELMACHOGERACHO
Your Ride: GM Pictures & Videos
44
Feb 8, 2006 09:25 PM







