polished my fog lights (picture inside)
Originally Posted by corvettecrazy
you should cover them with the 3M clear HL film. that way when the film gets bad you can just replace the film and not have to sand them again.
Originally Posted by bonnie94ssei
Originally Posted by corvettecrazy
you should cover them with the 3M clear HL film. that way when the film gets bad you can just replace the film and not have to sand them again.
Senior Member
Posts like a Supercharger
Joined: Jun 2005
Posts: 174
Likes: 0
From: Saint Charles, MO (outside STL)

Originally Posted by alexcoqui
OK, its a black box that I got at Advance. They have it for glass too, but those thont work or I didnt use those right. :?
Anyway, I used water with a little soap for the sanding. Then rinced with clean water & applied the pads.
The cracks where on the outside & were kind of deep. I started with 800 & was having trouble getting rid of the cracks. So I went down to 340 & that worked.
When I get home Ill check the name of the pads & let you guys know tomorrow.
Anyway, I used water with a little soap for the sanding. Then rinced with clean water & applied the pads.
The cracks where on the outside & were kind of deep. I started with 800 & was having trouble getting rid of the cracks. So I went down to 340 & that worked.
When I get home Ill check the name of the pads & let you guys know tomorrow.
Thread Starter
Senior Member
Posts like a Turbo
Joined: Sep 2005
Posts: 409
Likes: 0
From: Puerto Rico

Sorry, I had checked but I forgot to post back.
They are made by CCP. & are called "5 minute headlamp lens restorer".
They come in a black box, 1 plastic drill adapter, & 6 pads that stick to the adapter.
I found them at Advance Auto.
They are made by CCP. & are called "5 minute headlamp lens restorer".
They come in a black box, 1 plastic drill adapter, & 6 pads that stick to the adapter.
I found them at Advance Auto.
Thread
Thread Starter
Forum
Replies
Last Post
harofreak00
Your Ride: GM Pictures & Videos
102
May 2, 2007 12:45 PM
Cheetah
Everything Electrical & Electronic
4
Mar 24, 2006 06:00 AM
ukie eagle
Everything Electrical & Electronic
8
Feb 19, 2006 12:19 AM
Glasuan
Everything Electrical & Electronic
8
Feb 25, 2004 05:05 PM



