How the heck do you remove the head light assembly, I've removed both screws plus the head light bulbs low/high but can't remove the signals due to no space to get my hand into. The head light assembly seems to be clipped on in the corner of the signal light but I can't see anything to take off. How is this done?

pull straight out with a good amount of force.. its held in with a ball and socket

ok, haha my brother just said the same thing cause his maxima is like that.

is this the clip that has to come out in order for the head light assembly to be removed?
looking through the wheel well to the back of the head light assembly

you dont take any clips out.. just yank on it

but do the little clips holding this yellow plastic thing break when you yank on it? Or better yet does the yellow thing come out with the whole assembly? if so i'm going to cut the little clasps off it first before I go flying across the garage. (my brother and I are both trying to take these out and neither of us can get them out.)(i'm 25 and he'* 21 so we're not weak 16 year olds)

yes sometimes it helps to heat up the headlight with a hairdryer or the like

no no no, i'm still trying to remove the head light assembly from the car. And want to know if the off-yellow thing in the picture comes out with the whole assembly

FINALLY, I got them out what a pain in the arse that was.

did ya just pull :?: