Maroon with cleared lights?
#1
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2007
Location: Edinboro, PA
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Maroon with cleared lights?
Hey guys I was thinking about clearing my headlights and tail lights. The more I think about it... the front lights would look good, but would clear tail lights look good on a maroon car?
#3
IMO, cleared corners looks good on ANY color car.
People aren't clearing corner to match their paint, they are clearing because its unique, and not stock, and it flows better
People aren't clearing corner to match their paint, they are clearing because its unique, and not stock, and it flows better
#4
Originally Posted by harofreak00
IMO, cleared corners looks good on ANY color car.
People aren't clearing corner to match their paint, they are clearing because its unique, and not stock, and it flows better
People aren't clearing corner to match their paint, they are clearing because its unique, and not stock, and it flows better
#5
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2007
Location: Edinboro, PA
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
I don't want to cut into my headlights though, when I had my intrepid the headlights were absolutely horrible. I don't want anything to fog up... I really would rather have working good headlights than clear corners... i guess you could say that i am a little apprehensive.
#7
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2007
Location: Edinboro, PA
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
So, use a hairdryer? and then does it seal itself because it'* still hot when you close it back up or do i need to put on my own sealant?
#8
DINOSAURUS BOOSTUS
Expert Gearhead
I'd look up the clear corner king'* procedure (Toastedoats). Heat gun..hair dryer..either work and there is enough sealant that you don't add any.
Thread
Thread Starter
Forum
Replies
Last Post