got a paint quote for the Park Ave today (new pics!)
3 Attachment(s)
this is to fix the drivers door panel and rust at the bottom, repaint the body moulding, blend it into the fender and re-pinstripe fender and door
Attachment 40888 also to repaint the lower section of the passenger side door Attachment 40889 Attachment 40890 not a bad deal I think, anyone think I should be able to find lower than that? |
Re: got a paint quote for the Park Ave today
Shopping around couldn't hurt. ;)
|
That sounds pretty reasonable. It's actually giving me some confidence to go get a quote on my peeling roof rail area paint.
|
yeah thats a screaming deal!!!
infact as a painter Id be pissed if I had to do that job for so little :? |
Sounds like a sweet deal to me too!
|
Nice engine description :lol:
Yeah, like i said, thats a great deal..and much less work for you. |
Just out of curiosity do you think you will get another 6 to 8 hundred, when you sell it, if the paint work is done?
|
Wow good deal, and I didn't know you downgraded the motor?! Tryin to get more out of the deal? :lol:
|
Originally Posted by 95SLE
Just out of curiosity do you think you will get another 6 to 8 hundred, when you sell it, if the paint work is done?
|
id hit it, asap. itll bring up the value a good amount too
|
It say Blend the fender... but i looks to ne that the fender is already the wrong color. considering the only real point the the fender touchs (other then the door) is the hood(that is a a drasticly different angle) id have the fender painted solid (compleat/no blend)
Aslong as they blend the door back, you'll be ok ;) |
Check out snell, they were my best quote for my work...
|
Sounds like a very good deal to me as long as they do quality work. You probably already know that crappy work will most likely just end up costing more in the end.
|
Originally Posted by Peterg22000
It say Blend the fender... but i looks to ne that the fender is already the wrong color. considering the only real point the the fender touchs (other then the door) is the hood(that is a a drasticly different angle) id have the fender painted solid (compleat/no blend)
Aslong as they blend the door back, you'll be ok ;) |
I would check other work they have done. Remember that you get what you pay for. & usually cheap means cheap. If what you want is to hide the rust so you can sell the car better, I say great price. But if you plan to stay with the car, then you problably wont be 100% satisfied at the end.
|
I'd say that is a pretty good deal. I doubt you will find much lower than that.
|
Got 2 more quotes today:
Snell: 800-900 Chuck's: Won't touch it :? |
Originally Posted by harofreak00
Got 2 more quotes today:
Snell: 800-900 Chuck's: Won't touch it :? |
how concerned should I be about perfection? This paint is strictly to be good enough to sell the vehicle. Possbile that it would look worse than it is? Peter?
|
Originally Posted by harofreak00
Got 2 more quotes today:
Snell: 800-900 Chuck's: Won't touch it :? |
If you're just doing this to resell it go for that deal under 500, but I've never seen a $500 paint job that lasts. For roughly 2 years it should hold up fine.
|
If it's strictly for resale value, do it. If somebody looks at the car and something glaring stands out at them, they may be more inclined to nitpick and look for more problems, and try dicketing the price lower. If there's less to complain about, then there's less to dicker over and you have an easier time selling.
|
Make sure to look at some of their other work before committing. Make sure they're worth the money...
|
I had got another quote last Thursday from Heintz collision center=$1100.
I dropped it off at Al's Auto Body yesterday, he said it should be done by Wednesday or Thursday :D |
Man, I can't wait to see the results!
|
hope it turns out good :)
|
I'm surprised they won't touch it. It's not like it's UNIBODY rust that will cause a safety concern. I've gone to several shops to get quotes to fix rust before, and they just state they can't guarantee it won't return. They've never REFUSED work.
Anything is better than what you have now. |
nice, i cant wait to see what this thing looks like when its done. :)
|
Originally Posted by bonnie94ssei
Anything is better than what you have now.
|
That seems like a screaming price.
|
The original quote is a very good deal. $40 / hr rate is much better than the $85/hr rate out west. Cost me $300 just to repaint my back bumper for a fist sized mar.
I would have guessed a minimum $750. job. From the looks of it, you need to get it done ASAP. |
Originally Posted by 2000SilverBullet
From the looks of it, you need to get it done ASAP.
|
I'm in late on this, but I also say that's a screaming deal. I once repaired some dings and painted a few spots on my metallic silver Olds Cierra for $400, vs.the $1000+ quoted by other shops and was very pleased with the results. While there was one blended area that you could tell at the right angle, it was a great paint job that lasted at least the 6 years until I donated the car.
I think you'll be pleased, unless they totally botch it up, which seems unlikely. |
The only problem I could see is that it is a pearl which could be hard to blend
Grant |
1 Attachment(s)
I drove by the shop today and it happened to be sitting outside. He said he was letting it dry cuz he had just got all the dust off. All the body work is done and he is going to paint it tomorrow. He showed me a test panel that he painted to try to get a close match. He painted the metal white and then a ton of different layers of pearl coat. He decided he will have to do 7 layers of pearl to get it to match :shock: He said it should be done tomorrow evening, but I think I will pick it up Friday night.
There is no wavy line in the primer, that is only a shadow of my Bonneville Attachment 39596 |
wow, Im surprised he did a "let down panle"for it.. I havent done one of those since school.
Im also surprised he said it would take 7 layers of pearl.. it normaly only takes me 3-4 :? oh well, what ever works :P |
Got the call around noon today. He is done :clap:
I will stop and look at it tonight, but I don't think I will have a way to get both cars home tonight, since the shop is 40 miles from my home. |
I went and looked at it last night :shock: :D it looks great. He still had it in the booth and was putting the pin stripe on, but the color and quality looked great. He went above and beyond the call of duty and painted more than he said he would. He painted all of the lower rocker panels :clap:
This car is going to be mint! The bill was still $479.20, but I tipped him for his extra work and gave him an even $500 I'll be bringing it home tonight, and you KNOW there will be pics ;) |
Originally Posted by harofreak00
Got the call around noon today. He is done :clap:
I will stop and look at it tonight, but I don't think I will have a way to get both cars home tonight, since the shop is 40 miles from my home. drive 5 miles walk back, drive 5 miles walk back, drive 5 miles walk back :lol: |
Originally Posted by Gumball
Originally Posted by harofreak00
Got the call around noon today. He is done :clap:
I will stop and look at it tonight, but I don't think I will have a way to get both cars home tonight, since the shop is 40 miles from my home. drive 5 miles walk back, drive 5 miles walk back, drive 5 miles walk back :lol: Cant wait to see the pics! 8) |
All times are GMT -4. The time now is 09:33 PM. |
© 2024 MH Sub I, LLC dba Internet Brands