Fugly Tailpapes.
Thread Starter
Senior Member
Posts like a Corvette
Joined: Mar 2007
Posts: 1,388
Likes: 0
From: Machesney Park, Illinois Ride:_1993_Bonneville_SSEi got boost?
Fugly Tailpapes.
My pipes are a little corroded/rusty at the ends. What are my options of fixing it? Thanks
Thread Starter
Senior Member
Posts like a Corvette
Joined: Mar 2007
Posts: 1,388
Likes: 0
From: Machesney Park, Illinois Ride:_1993_Bonneville_SSEi got boost?
Originally Posted by toastedoats
take it to a exhaust shop and have them put some actual tips on there... the problem is that you just have straight piping, and no tips
Any cost estimate?
Senior Member
True Car Nut
Joined: Jan 2006
Posts: 8,029
Likes: 1
From: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
20-500$ 
Depends on what tips you want and if you do it your self or take it somewhere.
You can get cheap chrome tips that may start top rust in a year or two for like $10 each or so or you can get good stainless tips for around $30+ each and they will last a long time.
Depends on what tips you want and if you do it your self or take it somewhere.
You can get cheap chrome tips that may start top rust in a year or two for like $10 each or so or you can get good stainless tips for around $30+ each and they will last a long time.
Thread Starter
Senior Member
Posts like a Corvette
Joined: Mar 2007
Posts: 1,388
Likes: 0
From: Machesney Park, Illinois Ride:_1993_Bonneville_SSEi got boost?
Originally Posted by bandit
20-500$
Depends on what tips you want and if you do it your self or take it somewhere.
You can get cheap chrome tips that may start top rust in a year or two for like $10 each or so or you can get good stainless tips for around $30+ each and they will last a long time.
Depends on what tips you want and if you do it your self or take it somewhere.
You can get cheap chrome tips that may start top rust in a year or two for like $10 each or so or you can get good stainless tips for around $30+ each and they will last a long time.
Put the tips on myself? they just push on right?
I'm so terrible...
Senior Member
True Car Nut
Joined: Jan 2006
Posts: 8,029
Likes: 1
From: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
The stock SSE/SSEi tips bolt on to the Bumper, and the exhaust tip just sit behind it.
and sense the Stock tip is square not round, you going to have to bend or flatten you end of you exhaust to make it look right.
I dont have pics of mine right now but ill try to fins some on here or someone else will post them
and sense the Stock tip is square not round, you going to have to bend or flatten you end of you exhaust to make it look right.
I dont have pics of mine right now but ill try to fins some on here or someone else will post them
Senior Member
True Car Nut
Joined: Jan 2005
Posts: 3,882
Likes: 2
From: Montevideo, MN MWBF '05, '06, '07 WCBF '06 '07 survivor
http://cgi.ebay.com/ebaymotors/STAIN...QQcmdZViewItem
If you borrowed a pipe cutter and clamped them on it would save a little.
If you borrowed a pipe cutter and clamped them on it would save a little.
Thread Starter
Senior Member
Posts like a Corvette
Joined: Mar 2007
Posts: 1,388
Likes: 0
From: Machesney Park, Illinois Ride:_1993_Bonneville_SSEi got boost?
Ok.... Could someone explain the clamping process to me? and links to more exhaust tips. (that auction mentioned earlier ended)
Senior Member
Posts like a Northstar
Joined: Jun 2006
Posts: 747
Likes: 0
From: Waukesha, Wisconsin
http://www.hottexhaust.com/
There is a good selection of tips here. This is where I got mine. Others have purchased here also They delivered quickly
There is a good selection of tips here. This is where I got mine. Others have purchased here also They delivered quickly