front arrowhead clearing?
Has anybody ever cleared their front arrowhead here?....I'm losing the red in mine(its clearing itself,heh) so I am thinking about just going ahead and clearing it..should be fairly easy i think besides putting it back on..it appears to be melted into the grille by 2 tabs..dunno how easily it'll go back on after taking it off since i'll probably have to cut it off...any suggestions for re-installing it afterwards?
|
I actually just did it today - somewhat on accident. As far as removing goes, I don't know what would be best. I tried an overlay decal to impove the appearance of my faded arrow and didn't like it, and when I removed it, it took the arrow with. Maybe if you use some really strong tape you can get the same effect. I used a razor blade to actually clear it. It was tedious but it worked. For reinstallation I used some 3M double sided emblem tape which should work fine I would think. Here's the link to mine:
http://www.bonnevilleclub.com/forum/...ic.php?t=51181 EDIT: Here's a pic of my missing arrow. To get yours off try pushing something through that hole in the center. If I remember, that hole goes all the way through to the back side of the grille. The junk that's still on there is a soft adhesive material with some paint stuck to it. https://i37.photobucket.com/albums/e...ssingArrow.jpg |
Mine just fell off a while back. The glue I used to put it back ate the red over most of it, so I guess I cleared mine. Albeit unintentionally....
|
Originally Posted by MOS95B
Mine just fell off a while back. The glue I used to put it back ate the red over most of it, so I guess I cleared mine. Albeit unintentionally....
|
Mine also fell off a couple years ago and I glued it back on. It did lose some of the color also.
I think that evenly and gently prying or maybe using the poke-through method mentioned above would do it to remove the emblem. Clearing should be just as dillcc suggests. |
Are they glued or do they have two plastic weld spots on the back?
|
Originally Posted by BillBoost37
Are they glued or do they have two plastic weld spots on the back?
|
Originally Posted by BillBoost37
Are they glued or do they have two plastic weld spots on the back?
|
Originally Posted by dillcc
Originally Posted by BillBoost37
Are they glued or do they have two plastic weld spots on the back?
|
does anyone know if one can get a new arrowhead with color in it and replace it?
mine has faded bad |
All times are GMT -4. The time now is 08:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands