door panel repair
#1
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Sep 2004
Location: The Bluegrass State
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
door panel repair
Hey gang, Does anyone have any ideas how I can repair the vinyl on the lower part of my door panel?? As unfortunate as it is my Bonnie is my daily driver, and with my job I have to wear work boots. Point is, getting in and out of my car I have rather inadvertenly tore the door panel in a couple spots.
It'* noticeable and I don't like it. So if anyone'* got ideas shout em out to me.
Tim
It'* noticeable and I don't like it. So if anyone'* got ideas shout em out to me.
Tim
#3
Senior Member
Certified Car Nut
Join Date: Jul 2003
Location: Robbinsdale, MN
Posts: 15,408
Likes: 0
Received 0 Likes
on
0 Posts
I'm 99% sure thet WalMart still sells the vynil repair kits. Good for little nicks and small tears. You may not get an exact color/pattern match, but it shouldn't be overly noticeable (if used right)
You mix up a little of the "color matched" goo, apply it to the dmaged area, lay the pattern matcher over it, and heat it with an iron.
I should be swinging by WallyWorld on my way home tonight (need ink for my printer). I'll see if they stock it here. If so, they stock it everywhere
You mix up a little of the "color matched" goo, apply it to the dmaged area, lay the pattern matcher over it, and heat it with an iron.
I should be swinging by WallyWorld on my way home tonight (need ink for my printer). I'll see if they stock it here. If so, they stock it everywhere
#5
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Sep 2004
Location: The Bluegrass State
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
Thanks alot guys, I will mos definetly check it out.
With dial-up posting pics is such a pain, besides I'm not to good at it yet. :?
Thanks again,
Tim
With dial-up posting pics is such a pain, besides I'm not to good at it yet. :?
Thanks again,
Tim
Thread
Thread Starter
Forum
Replies
Last Post
anthonyv62
Everything Electrical & Electronic
2
01-19-2004 02:27 PM