94 3.4 Camaro wont start
#1
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2010
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
94 3.4 Camaro wont start
I'm pretty sure I know whats wrong already but my mothers 1994 camaro will run and get warm and then stall with no warning. I opened the pcv tube behind the throttle body and it was gummed up (yellowish gunk looked like crisco) , Autozoner told me it was the intake gasket shredded and clogging the pcv valve, but when I replaced it just to drive it for a bit it would turn and turn but no start, is the gasket really the problem or is there something im not seeing? Ignition is fine along with starting system.
#4
Senior Member
Posts like a 4 Banger
Join Date: Nov 2010
Location: Lorain, Ohio
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
What do they look like??
Im wondering if the headgaskets are blown or the LIM is leaking into the intake ports and its causing the spark to blow out.
Im wondering if the headgaskets are blown or the LIM is leaking into the intake ports and its causing the spark to blow out.
#6
Senior Member
Posts like a 4 Banger
Join Date: Nov 2010
Location: Lorain, Ohio
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Gas?? Turn the key on or start the car, pull the vacuum line off the fuel pressure regulator to see if fuel is coming out. If so, replace the FPR.
Do a spark check, you may just have weak spark as well.
Do a spark check, you may just have weak spark as well.
Thread
Thread Starter
Forum
Replies
Last Post