"E-Brake Light Always On"
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
"E-Brake Light Always On"
2000 Impala LS but I installed another cluster from a 01 Monte Carlo.. Baffled as to why the E-Break light is always on.. I put the original cluster in and it is off.. Any thoughts suggestions..
Thank you in advance...
thumbup2
Thank you in advance...
thumbup2
#2
Retired
Very possible the cluster is different.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#3
Senior Member
True Car Nut
the manual doesnt say anything about the different clusters, they mostly talk to the pcm via the serial network so the connections may be the same. the few things that dont go to the pcm dont have anything to do with the brake. i think if it was mine i would take it apart and desolder the led
#5
Senior Member
True Car Nut
Just in case the problem is not in the cluster, did you check the little plunger switch located at the top of the E-brake pedal. If it is out of position the E-brake light would be constantly on.
#6
Retired
Yea but Roy, he doesn't experience the same problem with the original cluster.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#7
Senior Member
True Car Nut
#8
Retired
I'll give ya that sir.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#9
Junior Member
Posts like a Ricer Type-R
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post
MissRockstar04
2000-2005
9
07-07-2009 04:12 PM