2000 Bonneville SSEI changing turn signal indicator with headlights and cruise control included. I have a wire I don’t know where it goes. Can anyone help. It is the wire at the top of photo

You are going to need to do a little better. I see a strand, I think.

The wire I don’t know where it goes is the black one on the bottom sticking up. Thank you

The wire is just two wires together with a connector at the end. One with is green with white line and the other is black

What does the original have?

Thank you for your help. I’m replacing the turn signal and wiring with the exact same. I don’t remember where I disconnected this wire from. It is longer than others and it’* wrapped in electrical tape with a green with white line wire and a black wire. The connector looks like it’* the female ends for maybe pins. Just my thoughts

I have the diagrams and will look up where that two wire strand goes when I can get to that data system tomorrow.

Thank you so much

The horn, lights, wiper/washer and cruise control all with wiring to the multi switch and there is no grn/wt wire on any of these. I'm thinking it is for a bulb. is there a light for the key?

I will definitely check. Thank you so much for your time