HUD Issues
It always seems that whenever I get everything fixed with my car, something else goes wrong. Probably some kind of automotive Murphy'* Law, oh well. Anyway, HUD is on the fritz, I've done a little research on the forum looking for an answer or at least someone else that might have had my problem but to no avail. I'm assuming my HUD switch as gone out as when I tap it my HUD will intermittently come on and go back out. It also seems dimmer than it used to be. All this started when I took the dash apart to take the radio out for some bulb soldering. Does the HUD switch have a cold solder within it that when I jostled it it broke, or are these switches just notorious for going out? If I need a new one any suggestions other than the dealership from which to get it?
Thanks guys
-Matt
Thanks guys
-Matt
eBay whoring!!
http://cgi.ebay.com/ebaymotors/92-99...Q5fAccessories
i know it says 92-99 but it sure does look like a 00+
http://cgi.ebay.com/ebaymotors/92-99...Q5fAccessories
i know it says 92-99 but it sure does look like a 00+
And Sam, I'm really thinking it'* the switch, I can tap it with my fingers and make the HUD turn off and on. Either that or the connector that plugs into the back (I'm not thinking that that theory is too likely).
I'm pretty sure this will fix you up.
https://www.gmforum.com/showthread.p...hlight=dim+hud
Likely a cold solder joint on the photocell.
https://www.gmforum.com/showthread.p...hlight=dim+hud
Likely a cold solder joint on the photocell.
Originally Posted by BillBoost37
I'm pretty sure this will fix you up.
https://www.gmforum.com/showthread.p...hlight=dim+hud
Likely a cold solder joint on the photocell.
https://www.gmforum.com/showthread.p...hlight=dim+hud
Likely a cold solder joint on the photocell.






