Ceramic Brakes for GXP
Member
Posts like a V-Tak
Joined: Jul 2007
Posts: 52
Likes: 0
From: Sterling Heights, MIchigan
GXP-Vince,
I replaced my front brakes at 6500 with the Delco Durastop ceramic pads and they've worked great. I have a lot less dust and they are really quiet so far. Only have 700 miles on these new pads but I'm really glad that I upgraded. Since the car had such low miles on it, I just had the stock rotors lightly turned to give me a good break in surface. I also had Reybestos Quietstop ceramics on my Cadillac STS and they were excellent as well.
I replaced my front brakes at 6500 with the Delco Durastop ceramic pads and they've worked great. I have a lot less dust and they are really quiet so far. Only have 700 miles on these new pads but I'm really glad that I upgraded. Since the car had such low miles on it, I just had the stock rotors lightly turned to give me a good break in surface. I also had Reybestos Quietstop ceramics on my Cadillac STS and they were excellent as well.
Senior Member
True Car Nut
Joined: Sep 2006
Posts: 3,277
Likes: 0
From: Somewhere south of Ottawa with your girlfriend driving faster then you.
Originally Posted by 05GXP
NAPA ceramics, 30xxx+ miles. Stop great, very little dust.
unless you are hammering on them from 140mph
They do turn the wheels a nice shade of gold... 
Senior Member
True Car Nut
Joined: Sep 2006
Posts: 3,277
Likes: 0
From: Somewhere south of Ottawa with your girlfriend driving faster then you.
I have the Advanced Technology Rotors on all 4 corners and Delco pads to follow them up.. The only thing I notice now is that I am boiling the brake fluid I should soon upgrade to DOT 5 and do stainless lines.
2 or 4 stops from 140+ and you really feel the loss of pedal.
2 or 4 stops from 140+ and you really feel the loss of pedal.
Thread Starter
Senior Member
Certified GM nut
Joined: Mar 2007
Posts: 1,937
Likes: 0
From: Yuma, AZ.
So I put on the ceramics and turned the rotors. Stops good no squeling but I still have lots of brake dust? I figured it was just because I just put them on and Just turned the rotors. Should it go away(at least be minimal) in like a week or so?
Senior Member
True Car Nut
Joined: Sep 2006
Posts: 3,277
Likes: 0
From: Somewhere south of Ottawa with your girlfriend driving faster then you.
Vince you need to upgrade the rotors as well..
like I mentioned,
Advanced Tech Rotors Part # 580264
and Delco Pads. part # 17D818CH ??
I believe that they are correct but should put you in the right area.. I know the rotors do not list for the GXP but do for the CTS and STS .
like I mentioned,
Advanced Tech Rotors Part # 580264
and Delco Pads. part # 17D818CH ??
I believe that they are correct but should put you in the right area.. I know the rotors do not list for the GXP but do for the CTS and STS .
Senior Member
True Car Nut
Joined: Sep 2006
Posts: 3,277
Likes: 0
From: Somewhere south of Ottawa with your girlfriend driving faster then you.
Originally Posted by All Things GXP
where is a good place to buy the rotors! I cant seem to find a place.
