im trying to remove the rear deck of a 93 SE and i cant seem to get the back seat out of the way.. any easy way to do that so i can swap out the speakers?

yes you dont have to remove the rear deck to get to the rear speakers

pull up on the rear speaker grilles, you will see the speakers, there are 2 clips that hold the plastic spacer and the speaker, pull them up and then replace the speaker....reverse for installation

It should be the front of the grill that lifts.

cool thanks guys

am i even going to need a wiring harness for the rear speaks or r the terminals available to unclip and reclip to the new speakers?

the connectors are on the factory speakers, and you cant remove then....if you can wait a few days, i can get you a factory connector and then you dont have to cut your factory wiring

Pat...would he need the male or female ends?

thanks anyways i dont need the harnesses.. but i just need to know hwich wire is the pos/neg wire.. because theres a dark blue and light blue and i can just get the terminals on after i no that

RH rear:
(+) Dk Blu
(-) Lt Blu

LH Rear
(+) Brn
(-) Yel

sHyt i think i did them both the opposite way..
is the rule that if u keep it consistent that it wont effect the sound or something.. i forget but just let me know if its a defenite "go" on re-wiring that stuff..
i did dk blue = neg brown=neg
light blue=pos yellow=pos