Need a visual reference, please...
Thread Starter
Senior Member
Certified Car Nut
Joined: Jul 2003
Posts: 15,408
Likes: 1
From: Robbinsdale, MN

I just got a power antennae (Thanks Boosty!!) and I was wondering if someone has, or could take, a picture of one mounted. I don't want to guess how it goes in, even though I think I could figure it out. With my messed up back, the quicker I can just pop it in and straighten up the better.
Thanks!!!
Thanks!!!
When I saw your pm...I sent him out.
There'* one 10mm for the ground on top and one for the bracket on the bottom. The rubber piece goes on the body first..then the antenna slides up and into it. Quickest mod in the world.
There'* one 10mm for the ground on top and one for the bracket on the bottom. The rubber piece goes on the body first..then the antenna slides up and into it. Quickest mod in the world.
Thread Starter
Senior Member
Certified Car Nut
Joined: Jul 2003
Posts: 15,408
Likes: 1
From: Robbinsdale, MN

Thanks to both of ya! I'm probably gonna go try and install it today. Should be really quick if all the wiring is hooked up and the rubber part is universal...
Thread Starter
Senior Member
Certified Car Nut
Joined: Jul 2003
Posts: 15,408
Likes: 1
From: Robbinsdale, MN

Well, it'* in. Looks good, works fine, but it'* a bit noisey. Is this normal? Or is there a way to lubricate more than just the antenna (without having to take it out again)
I can hear mine from the driverseat .. it'* tough to say what noisey is..
Lube the antenna liberally and allow some to seep down. At the worst it will run out the drain tube and onto the ground.
Lube the antenna liberally and allow some to seep down. At the worst it will run out the drain tube and onto the ground.







