How to wire subs into a stock bonne radio
Guest
Posts: n/a
you cant just "wire them in" well, you can, but they wont do anything really. you need to get an external amplifier
other than the amp, you need power wire direct from the battery, and a LOC (line output converter). the LOC takes the speaker wires from the stock HU and changes them into RCA jacks, which an amp needs to get audio signal
other than the amp, you need power wire direct from the battery, and a LOC (line output converter). the LOC takes the speaker wires from the stock HU and changes them into RCA jacks, which an amp needs to get audio signal
Thread Starter
Member
Posts like a V-Tak
Joined: Feb 2005
Posts: 52
Likes: 0
From: Renton Washington
lol well i mean i got all the wires and everything, and i got that thing you put on the rear speakers but i cant find the pos and neg wires on the stock speakers because it looks like ther are 2 of them 4 wires running into one speaker? two on each side,
O ya and on the wires running from my amp then have 2 holes that fit on the 2 holes from the coverter, what one goes on which side?
O ya and on the wires running from my amp then have 2 holes that fit on the 2 holes from the coverter, what one goes on which side?
Senior Member
Certified Car Nut
Joined: Oct 2003
Posts: 19,756
Likes: 1
OOK here we go.
THIS IS RH rear
there is a LT.blu that goes from your radio to the anp that is your (-)
there is a Dk.blu that goes from your radio to the amp that is your (+)
from the amp you will have a LT. blu wire that supplies the tweet and the rear 6X9 that is your (-)
from the amp you will have a DK. blu wire that supplies the tweet and the rear 6X9 that is your (+)
then you will have a BLK/ LT. green wire from the amp that goes to the 6X9 sub that is your (-)
you will have a DK. blu/ white wire from the amp that goes to the 6X9 sub that is your (+)
THIS IS RH rear
there is a LT.blu that goes from your radio to the anp that is your (-)
there is a Dk.blu that goes from your radio to the amp that is your (+)
from the amp you will have a LT. blu wire that supplies the tweet and the rear 6X9 that is your (-)
from the amp you will have a DK. blu wire that supplies the tweet and the rear 6X9 that is your (+)
then you will have a BLK/ LT. green wire from the amp that goes to the 6X9 sub that is your (-)
you will have a DK. blu/ white wire from the amp that goes to the 6X9 sub that is your (+)
Senior Member
Certified Car Nut
Joined: Oct 2003
Posts: 19,756
Likes: 1
this is your LH rear
there is a Yel that goes from your radio to the anp that is your (-)
there is a Brn that goes from your radio to the amp that is your (+)
from the amp you will have a Yel wire that supplies the tweet and the rear 6X9 that is your (-)
from the amp you will have a Brn wire that supplies the tweet and the rear 6X9 that is your (+)
then you will have a BLK/ LT. green wire from the amp that goes to the 6X9 sub that is your (-)
you will have a DK. blu/ white wire from the amp that goes to the 6X9 sub that is your (+)
there is a Yel that goes from your radio to the anp that is your (-)
there is a Brn that goes from your radio to the amp that is your (+)
from the amp you will have a Yel wire that supplies the tweet and the rear 6X9 that is your (-)
from the amp you will have a Brn wire that supplies the tweet and the rear 6X9 that is your (+)
then you will have a BLK/ LT. green wire from the amp that goes to the 6X9 sub that is your (-)
you will have a DK. blu/ white wire from the amp that goes to the 6X9 sub that is your (+)
Senior Member
Certified Car Nut
Joined: Oct 2003
Posts: 19,756
Likes: 1
Originally Posted by Bastard_Kid_Kris
there should be some sort of marking on the speaker wire jacket. just make sure they match up, and youre golden.
usually, if the wire is marked, its negative
usually, if the wire is marked, its negative
Thread Starter
Member
Posts like a V-Tak
Joined: Feb 2005
Posts: 52
Likes: 0
From: Renton Washington
so i put the converter on these wires for both the left and right? ( the colors on the bottom)
then i hook up my aftermarket amp to the converter and the battery and then its good to go?
then you will have a BLK/ LT. green wire from the amp that goes to the 6X9 sub that is your (-)
you will have a DK. blu/ white wire from the amp that goes to the 6X9 sub that is your (+)
then i hook up my aftermarket amp to the converter and the battery and then its good to go?
then you will have a BLK/ LT. green wire from the amp that goes to the 6X9 sub that is your (-)
you will have a DK. blu/ white wire from the amp that goes to the 6X9 sub that is your (+)
