C2R-GM32R harness question
Thread Starter
Senior Member
True Car Nut
Joined: Mar 2009
Posts: 2,894
Likes: 0
From: Fort crack homie

i bought the GMOS-09 before and it never worked
so i thought id buy the C2R-GM32R since PAC is well known
i installed the C2R-GM32R today and still no audio out
i was wondering if anyone can help me and tell me where to start trouble shooting this.
the deck works fine it was tested on a seperate speaker and audio was working.
also tested the signal coming out of the remote wire from the deck it was ~12v
there is no sound whats so ever..
this is the second harness i buy
i have a 2005 Bonneville GXP with Monsoon sound system and onstar
and the deck is the pioneer AVIC-F700BT..
any help is really appreciated..
thanks
samz
so i thought id buy the C2R-GM32R since PAC is well known
i installed the C2R-GM32R today and still no audio out
i was wondering if anyone can help me and tell me where to start trouble shooting this.
the deck works fine it was tested on a seperate speaker and audio was working.
also tested the signal coming out of the remote wire from the deck it was ~12v
there is no sound whats so ever..
this is the second harness i buy
i have a 2005 Bonneville GXP with Monsoon sound system and onstar
and the deck is the pioneer AVIC-F700BT..
any help is really appreciated..
thanks
samz
I have always used metra harnesses and im not familiar with pac ones. I have always used pac for aux adapters and ipod cables. I have a friend that works there so, if nobody answers you by monday I will call him and find out for you. Just to double check, you got all power and no audio. right?
that harness does not send a signal to turn on the factory amplifier. That would be why you arent getting audio. You can either bypass the factory amp or see if it works if you send the 12V switched signal to the amp turn on wire
Thread
Thread Starter
Forum
Replies
Last Post
ssnhrn
Everything Electrical & Electronic
2
Apr 28, 2010 11:30 AM
Bonnie99
Performance, Brainstorming & Tuning
2
Feb 13, 2009 02:45 PM



