probably not

check here for reference:
http://www.bonnevilleclub.com/forum/...ic.php?t=39604

see, my OEM rear speaks have been replaced and are apparantly just running off of the OEM high pass leads-...

Well..that'lll happen... I think you are SOL on the gain then

OK lets play "what if"...

what if I was using an aftermarket head unit, and everything else was OEM- would the gain slider be functional?



also


will I need the antenna adapter when I go to install this puppy?

idk

and

yes

in case anyone wants to know how the fools butchered my rear harness...

Yes you can use the factory amp with an aftermarket HU


and yes.....

if you need help, you can always come down and we can work on it

OK then, heres the tentative plan

- install the new HU and SWI
- modify the pioneer 6x9s to allow using the factory amp (restore OEM harness)

I hope the OEM amp wont hurt the sound

if you use the amp you can use amp to power the 6x9'* and then the Higs to power the tweets

the radio/instrument panel surround trim just pops off the dash right? any hidden screws I should look for?

but I have 3 or 4 way 6x9s though.