Who carries the L-67 BCA? DYING TO FEEL FULL BOOST
Okay I carefully checked all my vac lines and T'* and they look great.
Pulled the connectors loose and checked for corrosion and everything looked fine there.
I am attaching a picture since I have nothing to refer to and no history with these but if you look there is a faint green arrow pointing at this Supercharger by pass valve.
I saw nothing hanging loose but is there supposed to be a line hooked on here?
Pulled the connectors loose and checked for corrosion and everything looked fine there.
I am attaching a picture since I have nothing to refer to and no history with these but if you look there is a faint green arrow pointing at this Supercharger by pass valve.
I saw nothing hanging loose but is there supposed to be a line hooked on here?

Yes, I am sure that is going to be a nice mess under there. If there is wiring under there it might be pretty crusty,rusty and swampy (all things electrical connections LOVE
).Okay when the weather gets better I will do that.Now that you have mentioned it, I will be constantly wondering what is hiding under there so that will be good incentive to get some light on it.
Thanks for the info on the valve. I was all excited earlier hoping I would fine the magic line laying up somewhere and just replace the line and be boosting down the road ha ha
I did go ahead and pull the valve off and clean it up and inspect it as much as I could.
Have to go now and take a timed test to hopefully get a job interview (yes now it is clear why I have had some much time on here lately
).Anyhow again I appreciate it fellas. I am learning more and more each day and hopefully at some point I can help some other poor newbie slob like me on their ride
Senior Member

True Car Nut
Joined: Sep 2006
Posts: 4,816
Likes: 245
From: Windsor, Ontario / Detroit, Michigan









Pulling a front seat is one of those jobs you dread doing, but after its done you realize how easy it is. Four bolts (T55 I think) and some electrical connectors. Nothing to it.
Oh I don't mind pulling a seat just dreading the swampy mess and possible rust in my "new" car when I lift the carpet.
I have all the supplies to treat it and make it right though. Maybe I will find some factory paperwork while I am puttsing around too
I have all the supplies to treat it and make it right though. Maybe I will find some factory paperwork while I am puttsing around too
Hey, so I am looking up the wheel speed sensors figuring I need to replace the whole hub but then I find JUST the actual sensor.
Is it possible for this alone to get ride of my C1234 wheel speed sensor code and dash lights? Definitely cheaper
Discount Body Parts
Is it possible for this alone to get ride of my C1234 wheel speed sensor code and dash lights? Definitely cheaper

Discount Body Parts


