I got a 2004 bonne sle, bought a pcv valve just to change it and get everything onto my schedule.Thanks Dave

hey thanks for movig it but didnt have the answear ?

nevermind found it ....I am blind lol ....

When you change the valve, make sure you have one o-ring on the bottom nipple of the pcv valve. Sometimes the o-ring sticks in the plastic bore and is very hard to see. If you install two o-rings or no o-rings you may have troubles.

Your pcv valve and its o-ring seals should look like this (your newer car will have a more complicated cap that fits the MAP sensor, but the seals are the same as shown for a '95 below:

thankyou very much for the info