SPONGY BRAKE PEDAL
Thread Starter
Senior Member
Posts like a 4 Banger
Joined: May 2004
Posts: 110
Likes: 0
From: king's lynn norfolk united kingdom
SPONGY BRAKE PEDAL
Hi people hpoe you can help me
i had new rear brake pad'* fitted to my motor last july i have done about 1500 miles on them as it does'nt get used through the winter.
pulled it out of the garage and the pedal fill'* very spongy (sorry also had brake fluid changed) it'* like it has air in the systerm do think that lying it up for the winter has affected it
also the parking brake you have to push the pedal all the way down to make it hold
thank you in advance
paul
i had new rear brake pad'* fitted to my motor last july i have done about 1500 miles on them as it does'nt get used through the winter.
pulled it out of the garage and the pedal fill'* very spongy (sorry also had brake fluid changed) it'* like it has air in the systerm do think that lying it up for the winter has affected it
also the parking brake you have to push the pedal all the way down to make it hold
thank you in advance
paul
Senior Member Emeritus
Posts like a Camaro
Joined: Feb 2005
Posts: 1,129
Likes: 0
From: Grand Rapids, Iraq
As for the pad feeling spongy? Get it out on the road, do some gradual braking, then get up to highway speed and brake from there also. Assuming you had this car stored for a length of time w/o driving it, all the fluids settle, not matter what they do.
Guest
Posts: n/a
Good to hear from someone in a different country. It'* common for cars like Camaros and Mustangs to be exported but I wouldn't have guessed someone exported a Bonneville. How did your car come to be in the UK and how do you drive a left hand drive car in a right hand drive country?
Senior Member
True Car Nut
Joined: Jun 2003
Posts: 6,313
Likes: 2
From: Purgatory
You need to bleed the brakes from the sounds of things.
Start with the furthest one from the master brake cylinder and work your way in, ie rear passenger, rear driver side, passenger front then drivers side front.
Start with the furthest one from the master brake cylinder and work your way in, ie rear passenger, rear driver side, passenger front then drivers side front.
Senior Member
True Car Nut
Joined: Sep 2004
Posts: 6,837
Likes: 3
From: Fitchburg Ma _ToastedRice_
Originally Posted by Mark Fahey
Good to hear from someone in a different country. It'* common for cars like Camaros and Mustangs to be exported but I wouldn't have guessed someone exported a Bonneville. How did your car come to be in the UK and how do you drive a left hand drive car in a right hand drive country?
Thread Starter
Senior Member
Posts like a 4 Banger
Joined: May 2004
Posts: 110
Likes: 0
From: king's lynn norfolk united kingdom
As for the pad feeling spongy? Get it out on the road, do some gradual braking, then get up to highway speed and brake from there also. Assuming you had this car stored for a length of time w/o driving it, all the fluids settle, not matter what they do.
You need to bleed the brakes from the sounds of things.
Start with the furthest one from the master brake cylinder and work your way in, ie rear passenger, rear driver side, passenger front then drivers side front.
Start with the furthest one from the master brake cylinder and work your way in, ie rear passenger, rear driver side, passenger front then drivers side front.
I would assume this feeling is sponger than usual? Right?
thank'* guy'* for your replys the brakes were done by company that do all the american servicemens motors from lakenheath and mildenhall air base'* in suffolk so are usellay pretty good but when i tax the motor i will take it back and ask them to check through the systerm for air or if there is anything else wrong
ps dont get chance to work on it myself to busy at work on permanant call out
many thank'* guy'*
Paul
Thread
Thread Starter
Forum
Replies
Last Post
